Walking assistance mode

This mode allows you to get assistance from the motor when you have to push the eBike while walking and with both hands on the handlebars. This helps, for example, when cycling in areas that are not very cycle-friendly. To use the drive assistance mode, an additional accessory such as the eShifters or the DUO remote is required to enable it to work properly.

The maximum speed of the driving assistance is 6 km/h and if this is exceeded, the driving assistance will be automatically switched off. The driving assistance will also switch off when the button is released.

The colour of the current assistance level shall be displayed on 50 % of the LED bar, when the drive mode is active.

NOTICE

Remember that the ride assist mode should only be used when riding on foot, not on the bike, with both hands holding both sides of the handlebars and with two wheels in contact with the ground to avoid injury.

NOTICE
The manufacturer may modify the functionality of the left and right buttons. Refer to the manual for your specific model for detailed information. By pressing the button for a longer period of time, you can control both the ride assistance and the lights. Due to some particular regulations, the original manufacturer may set the eBike status lights when starting the system.

Prev

Next

Prev

Next

Stay up to date

Accessories