Assistance levels
There are different motor assistance levels that vary in power, acceleration, and the assistance ratio offered to the eBike. These levels provide an appropriate user experience depending on the type of use. Depending on the three parameters mentioned above, the eBike may prioritize battery saving, maximum power, or acceleration.Assistance modes can be customized from the […]
Control Unit Information
1.7.1 Data ScreenOn the Head Unit+ screen we can view a series of data, some fixed and others configurable from the MySmartbike app: Field 1: shows the assistance level currently selected by the user. Field 2: shows whether the system lights are on (icon displayed) or off (empty). Field 3: shows that the MySmartbike app […]
Extended Assistance Mode (Overrun)
This mode allows the motor to provide assistance for a short period of time after the user has stopped pedaling. This helps, for example, to overcome obstacles or to move through areas where cycling is difficult and pedaling is not possible. This mode can be customized, either from the MySmartbike app or directly from the […]
Auto Hold Mode
This mode allows the eBike to remain steady on an incline without rolling backwards, simply by placing a foot on the pedal. This helps, for example, when starting on a slope without having to use the brakes to prevent the eBike from rolling back. No additional accessory is required to use this function, as it […]
Gear Recognition
One of the functionalities implemented in the M40 system is the detection of the gear in which the eBike is currently operating. A data field exists to consult this information from the Head Unit+, provided it has been configured in the MySmartbike app.
Lights
There are 3 modes to control the lights: Automatic mode: with the ambient light sensor and depending on environmental conditions, the Head Unit+ will automatically switch the lights on or off. Always-on mode: the lights remain on as long as the eBike is not switched off. Manual mode: the user can control the lights at […]
Battery Charging Process
1.12.1 Active Charger The MAHLE M40 Active Charger is compatible with all batteries in the MAHLE M40 system. It allows fast charging up to 4A, using the CAN-BUS communication port to identify the battery model and current charge level, supplying the appropriate charging current accordingly. The charger includes a light signal to indicate the mode […]
Update Process
Whenever an update is available, you can update the system through the MySmartbike app in just a few simple steps.
Care and maintenance
WARNING All parts of the system are fully replaceable, but please note that only service personnel or an authorised MAHLE dealer may change or manipulate parts. The MAHLE M40 system is designed for long-term use. You only need to follow a few guidelines to extend the life of the system. Contact your point of purchase […]
Caring for your eBike
General system care Keep your eBike system clean and dry. Never wash any components of your eBike with a pressure washer or high-pressure cleaning system, as water entering the components may cause malfunctions, corrosion, or safety issues such as fire or explosion. Do not use aggressive cleaning products. To remove mud or other debris, do […]
