Introduction to the M40 System
Thank you for trusting MAHLE SmartBike Systems, hereinafter referred to as MAHLE, and for choosing your M40 System. Read this manual carefully before starting the system. Otherwise, or if you do not understand its instructions, it may cause serious injury or death. This document is written in Spanish, according to standard EN82079-1, and its content […]
General Warnings
This manual contains indicators of DANGER, WARNING, and CAUTION regarding the consequences of improper use, assembly, maintenance, storage, inspection, and disposal of MAHLE eBikes (Electric Bikes). The combination of the safety alert symbol and the word DANGER indicates a hazardous situation which, if not avoided, may result in serious injury or death. Keep all safety […]
Safe charging procedure
Before using your eBike for the first time, carefully read the guidelines for safe battery charging and management. The MAHLE M40 System includes an intelligent charging system that manages the internal battery charging. This system supplies the correct charging current and ensures the ideal balancing of the cells that make up the battery. Use only […]
Use and operation
The MAHLE M40 System is designed to assist you while pedaling in accordance with your country’s regional regulations. Please refer to the specific section on use and operation of the system.
Care and maintenance
Refer to the specific section on care and maintenance of your eBike before carrying out any of these tasks. Remember that only official MAHLE services can perform maintenance, replacement, and repair of certain system components. In case of repair, the MAHLE technical service must authorize the process. Regarding the batteries that are part of the […]
Recycling
You must ensure proper recycling of the different system components as well as the packaging materials. Pay special attention to the battery, especially when it reaches the end of its service life. To do so, contact your dealer or the eBike manufacturer to ensure the recycling process is carried out correctly. If you need to […]
Product certifications
MAHLE Smartbike Systems SLU declares that the MAHLE M40 System or its applicable components comply with: EUROPE: With the harmonized standard EN15194:2017, European Directives 2006/42/EC, 2014/30/EU, 2014/53/EU, 2006/66/EU, 2014/35/EU, and the POP, RoHS, and REACH Regulations. Noise emissions do not exceed the limits established by current European legislation. USA and CANADA: With the ANSI /CAN/ […]
General description
The main feature of the systems that make up MAHLE’s M series is the type of motor they use, which is located in the bottom bracket of the eBike. The M series currently consists of the M40 System. The MAHLE M40 System is made up of several components: Motor: installed in the bottom bracket area […]
M40 System
Motor Motor M40 Battery iM5 iM8 M Active Charger Interface HU+ HUS Pulsar One Remote DUO Remote TRIO eShifters Sensor Speed Sensor Accessories Lights
Motor
Motor M40 Maximum torque: 105 Nm Nominal voltage: 46.8 V Maximum power: 850 W Nominal power: 250 W Includes fastening component kit Compatible with different drivetrain components Compatible with cranks with ETOR interface Maximum speed: 25 km/h or 20 mph (limited by region) CAN-BUS Weight: 2500 g
